Harmful Ingredients; Cleaning Instructions; Special Cleaning Notes; Materials Required - Motorola ET1 Integrator Manual

Harmful Ingredients

The following chemicals are known to damage the plastics on the ET1 and should not come in contact with the
device: ammonia solutions, compounds of amines or ammonia; acetone; ketones; ethers; aromatic and
chlorinated hydrocarbons; acqueous or alcoholic alkaline solutions; ethanolamine; toluene; trichloroethylene;
benzene; carbolic acid and TB-lysoform.

Cleaning Instructions

Do not apply liquid directly to the ET1. Dampen a soft cloth or use pre-moistened wipes. Do not wrap the
device in the cloth or wipe, but gently wipe the unit. Be careful not to let liquid pool around the display window
or other places. Allow the unit to air dry before use.

Special Cleaning Notes

Many vinyl gloves contain phthalate additives, which are often not recommended for medical use and are
known to be harmful to the housing of the ET1. The ET1 should not be handled while wearing vinyl gloves
containing phthalates, or before hands are washed to remove contaminant residue after gloves are removed. If
products containing any of the harmful ingredients listed above are used prior to handling the ET1, such as
hand sanitizers that contain ethanolamine, hands must be completely dry before handling the ET1 to prevent
damage to the plastics.

Materials Required

•
Alcohol wipes
•
Lens tissue
•
Cotton tipped applicators
•
Isopropyl alcohol
•
Can of compressed air with a tube.

Cleaning the ET1

Housing

Using the alcohol wipes, wipe the housing and buttons.

Display

The display can be wiped down with the alcohol wipes, but care should be taken not to allow any pooling of
liquid around the edges of the display. Immediately dry the display with a soft, non-abrasive cloth to prevent
streaking.

Camera Lens

Wipe the camera lens periodically with a lens tissue or other material suitable for cleaning optical material such
as eyeglasses.

Connector

Remove the main battery from mobile computer.
1.
Dip the cotton portion of the cotton tipped applicator in isopropyl alcohol.
2.
Maintenance & Troubleshooting 9 - 3