Set Screen Unlock Using Password - Motorola ET1 Integrator Manual

Enter a PIN (between 4 and 16 characters) then touch OK.
2.
Re-enter PIN and then touch OK.
3.
Touch Use tactile feedback to enable vibration when the user enters PIN.
4.
Touch Home. The next time the ET1 goes into suspend mode a PIN is required upon waking.
5.
PIN Screen
Figure 7-3

Set Screen Unlock Using Password

To set the ET1 to have the user enter a password:
Touch > Settings > Location & security > Set up screen lock > Password.
1.
Enter Password Screen
Figure 7-4
Enter a Password (between 4 and 16 characters) then touch OK.
2.
Re-enter Password and then touch OK.
3.
Touch Use tactile feedback to enable vibration when the user enters password.
4.
Touch Home, The next time the ET1 goes into suspend mode a Password is required upon waking.
5.
Settings 7 - 3