Start; Set Up - Motorola xoom Manual

Start

Charge
Caution: Before assembling, charging or using your product for the first time, please read
the important Safety, Regulatory & Legal information provided with your product.
Caution: Only use the charger that came with your tablet. Do NOT attempt to connect a
charger to the Micro USB connector—this is for data transfer only.
Note: The battery should only be replaced by a Motorola approved service facility. Any
attempt to remove or replace your battery may damage the product.
Insert the charger into the charger port on
the bottom of the tablet.

Set up

1 Press and hold Power/Lock
of your tablet to turn it on.
Tip: In the unlikely event that your tablet
becomes unresponsive, try a forced
reboot—press and hold both
Power/Lock and the up volume key for
three seconds.
2 To change the language, touch
Start
3 Touch .
Note: If your tablet has mobile network service, it should activate now. If activation is
successful, touch
to try again, or touch
WiFi setup
4 In the
Wi Fi setup for now and set up later (see "Settings & Connections" on page 7).
on the back
.
Next
. If activation is cancelled or fails, touch
Skip
to skip activation and go on to Wi Fi setup.
screen, you can connect to an existing network, add a new network, or skip
Battery Charging Indicator
Back Activate
to go back, touch
START 3