Monitoring Mk2200S On A Network - Symbol MK2200 MicroKiosk Product Reference Manual

4 - 16 MK2200 MicroKiosk for CE .NET 4.2 Product Reference Guide
-
Specify the
255.255.255.255. This causes discovery of all device in all network interfaces attached to a single
computer (multi-homed computer).
Click OK to save the changes and close the
3.
Click Defaults to load the default settings for the RDM.
4.
Click Cancel to exit the
5.

Monitoring MK2200s on a Network

Use the RDM to remotely monitor MK2200s connected through a network connection. After performing
discovery, double-click on an MK2200 from the discovery list, or click on the MK2200 in the list and select
> Device Information
View device general information. See
•
page 4-17.
View software version information, such as applications, drivers, OS, and platform. See
•
Information - Software Tab: Version Information on page
View RAM and flash memory usage for the selected device. See
•
Memory Availability and Usage on page
View partition information for the selected MK2200. See
•
Use the up and down arrow keys to navigate through the discovered devices to view information.
Click Refresh to refresh the device properties list.
Click Generate Report to place the information displayed in the tabs into a printable file.
, used in discovering devices on the network. The default value is
Broadcast IP Address
screen without saving the settings.
RDM Options
from the RDM menu:
Device Information - Info Tab: Detected Device Information on
4-19.
window.
Options
4-18.
Device Information - Storage Tab:
Managing Static IP Addresses on page
View
Device
4-21.