Symbol MK2200 MicroKiosk Product Reference Manual page 88

4 - 6 MK2200 MicroKiosk for CE .NET 4.2 Product Reference Guide
Symbol Remote Device Manager Menu Items (Continued)
Table 4-1
Menu Item
Device Information
RF Signal Strength
View Filter Parameters
Set Default Column
Width
Actions Menu
Locate Device
Ping Device
Delete Device
Cold Boot
Warm Boot
Launch AirBeam
Tools Menu
Create Local
Configuration File
Displays information on the selected MK2200. See
MK2200s on a Network on page
Launches the RF Signal Analyzer which displays RF signal
strength. Only RF MK2200s running Mobile Companion support
this feature. RF MK2200s running Aegis Client do not support this.
Toggles on/off the Filter Parameters panel of the RDM.
Sets the default column width for fields displayed in main
screen.
Initiates the device locating mechanism. Select an option for
locating the device from the sub menu:
Select
Display Color Screen
•
the target device.
Select to play a high-pitched sound clip from
Emit Sound
•
the target device.
Select
Display Color and Emit Sound
•
previous two mechanisms in the target device.
Select
Terminate Locator
•
mechanism. This terminates the current locator mode
before initiating another locator mode.
Ping the selected device. If the device cannot be reached, an error
message displays.
Removes the selected device from the list of discovered devices.
This only deletes the devices highlighted in gray.
Cold boots the selected/highlighted MK2200(s). Allow
approximately one minute for the device(s) to reboot and
reconnect, then select
View > Refresh
rebooted successfully.
Warm boots the selected/highlighted MK2200(s). Allow
approximately one minute for the device(s) to reboot and
reconnect, then select
View > Refresh
rebooted successfully.
Launches the AirBeam version 2.16 application on the
selected/highlighted MK2200(s). See
page 4-14.
Creates a new configuration file and allows saving it to the PC
hard drive. See Creating a Configuration File on page
Function
Monitoring
4-16.
to display a color screen on
to invoke both the
mode to terminate the locating
to verify the devices
to verify the devices
Setting RDM Options on
4-12.
RDM