Communications - Symbol MK2200 MicroKiosk Product Reference Manual

3 - 8 MK2200 MicroKiosk for CE .NET 4.2 Product Reference Guide
Application Default Parameters (Continued)
Table 3-3
Application Parameters
Transmit Code ID
No Shell Present
Slide Show
Background Color
Display Duration
Image Directory

Communications

The third branch of the MK2200 Configuration Utility window and System Menu is
describes these wired Ethernet parameters. To configure DHCP options, see
4-25, and to specify RF settings for wireless networks see
Connections on page
Communication Default Parameters
Table 3-4
Communication
Parameters
Onboard Wired Ethernet
Enable DHCP
IP Address
Subnet Mask
Default Gateway
Description
Transmit bar code type identifier.
Flag indicating the wedge
should not put an item on the
system tray.
Slide Show Inactivity Application parameters
Default screen background color
if image is smaller than screen.
Format is 0BGR, where the first
byte is zero, and the rest are
byte values for each color.
The duration, in seconds, to
display each image before
loading the next image. The
minimum delay allowed is 2s. If
this value is less than 2s
SlideShow takes delay as
system default of 5s.
The directory that contains the
images to display.
3-9.
Description
Onboard Wired Ethernet Configuration
Check to turn on DHCP Address
resolution. When checked, do not
set IP Address, Subnet Mask,
Gateway, DNS Server(s), or WINS
Server(s).
Sets the IP Address for the
Onboard Wired Ethernet adapter.
Sets the subnet mask for the
Onboard Wired Ethernet adapter.
Sets the Default Gateway for the
Onboard Wired Ethernet adapter.
Default
None
Disabled
7340032 (0x700000 hex)
5 (0x5 hex)
\Application\Slides
Communications
DHCP Configuration on page
Specifying RF Settings for Wireless Network
Default
Enabled
None
None
None
. Table 3-4