Symbol MK2200 MicroKiosk Product Reference Manual page 243

When the command file upgrade begins, the following message displays.
9.
Downloading:
Via PC Card CF_MK2000_XXX.mcf
Obtaining script file from given transport . . .
################### 100%
Begin script execution
-----------------------------------------------------------
Partition Table
################### 100%
Download complete
in 0.656 seconds
(12487 bytes/second)
----------------------------------------------------------------
Splash Screen
################### 100%
Download complete
in 3.257 seconds
(94131 bytes/second)
----------------------------------------------------------------
Platform
################### 100%
Download complete
in 14.337 seconds
(365000 bytes/second)
----------------------------------------------------------------
Application
################### 100%
Download complete
in 39.38 seconds
(718000 bytes/second)
----------------------------------------------------------------
################### 100%Your terminal needs to be rebooted.
Please press button A to reboot.
Command File Upgrade, Downloading Message
Figure G-15
If an error screen displays, remove power from the MK2200 and restore power to reboot
NOTE
the device. Hold the A button during the reboot. The IPL main menu displays. Repeat the
Command File upgrade procedure.
Press and release button A to perform a warm boot. When the desktop displays, remove power from the
10.
MK2200. Remove the PC card and replace the PC access cover (see
Appendix G: OS Upgrade Procedures G - 9
Command File
Figure 1-2 on page 1-4).