Table of Contents
Advertisement
8 - 10 MK2200 MicroKiosk for CE .NET 4.2 Product Reference Guide
Keycode Values (Continued)
Table 8-6
Function
DOWN
MULTIPLY
ADD
SEPARATOR
SUBTRACT
DECIMAL
DIVIDE
SEMICOLON
EQUAL
Network Time Update: SNTP Client
The MK2200 Simple Network Time Protocol (SNTP) client can automatically set and update the MK2200 time
and date through the network. Use this feature to set the system time and date after reboots or power outages.
This feature also ensures consistent time and date stamping across a fleet of MK2200s. The SNTP Client
program queries the specified SNTP server over the network to set the time and date.
The SNTP client shipped with MK2200 WinCE 4.20 is the Microsoft default SNTP Client program. (This is a
change from the WinCE 4.1 operating system, which had a custom SNTP client).
MK2200 allows changing four parameters of the SNTP Client. See
Memory Management
Flash: Nonvolatile (Persistent) Memory
The MK2200 has 64 MB of available nonvolatile flash memory. 5 MB is committed for platform partition use to
install external driver packs such as RF drivers, 27 MB is available for developer's applications within the
application partition (folder). The data partition (folder) has no available memory. The data stored in flash
memory persists through cold boot cycles.
To increase usable persistent (flash) memory, use TCM to adjust the allocation of memory between the
application and data partitions.
Add a PC card to the MK2200 to increase the non-volatile memory available for file storage.
Button Values
Value
0x28
0 thru 9 are the same as ASCII '0' thru '9'
0x6A
A thru Z are the same as ASCII 'A' thru 'Z'
0x6B
SHIFT-TAB
0x6C
ALT-DOWN
0x6D
CALIBRATION
0x6E
SYSTEM MENU
0x6F
Mobile Companion Signal Strength /
Aegis Client Configuration Dialog
0xBA
TOGGLE SOFTWARE INPUT PANEL
(SIP)
0xBB
Function
Network Time Update on page
Value
0x30 – 0x39
0x41 - 0x5A
0xC2
0xC3
0xC4
0xC5
0xC6
0xC7
3-13.
Advertisement
Table of Contents
Troubleshooting
