Table of Contents
Advertisement
6 - 4
MK2200 MicroKiosk for CE .NET 4.2 Product Reference Guide
Disabling and Restoring the Web Kiosk Software Suite
To prevent the MK2200 from entering an application, simultaneously hold down buttons A and D just after
1.
the blue
Performing System Initialization (Phase 1)
. Release the buttons.
Phase 2
When the
2.
Enter Password
simultaneously press the A and B buttons for Enter.
The MK2200 enters Protected Mode and the Windows
Double tap the
3.
Double tap the
4.
Use the cut function to cut
5.
Double tap the
6.
Reboot the MK2200. The Windows
7.
To restore the Web Kiosk Software Suite, move the
8.
folder.
Starting and Exiting the Web Kiosk Software Suite
Before launching the Web Kiosk Software Suite, print out the
D-1
used to demonstrate MK2200 features. For sample source code that demonstrates automatic MK2200
startup from a browser application, refer to the
MK2000WEBKSS_X.XX.zip.
To launch the Web Kiosk Software Suite automatically, apply power to the MK2200 and allow the boot
sequence to proceed uninterrupted. To exit the Web Kiosk Software Suite and access the Windows
Desktop, see
Accessing the Windows® CE Desktop on page
Web Kiosk Software Suite Structure
The Web Kiosk Software Suite
screens are for store employee access only. Use the
screens. These screens use the four programmable buttons and/or virtual touch screen buttons
Operations
(displayed over the four function buttons).
The
Customer Application
Main Menu Bar on page 6-5
•
Scanning Bar Codes on page 6-5
•
Attract Mode on page 6-6
•
Price Verification on page 6-7
•
Price Verification Menu Bar on page 6-8
Printing on page 6-8
•
Loyalty Program on page 6-10
•
Guided Selling Tool (Select Ink Cartridge) on page 6-11
•
prompt appears, enter DDBAC, then touch OK on the MK2200 screen or
icon.
My Computer
folder.
Application
from the
mkconfig.reg
MK2000WebKioskSoftwareSuite
®
CE desktop displays.
Customer Application
screens demonstrate the customer support features.
screen displays, and before the message changes to
®
CE desktop displays.
My Computer\Application
folder and paste the
mkconfig.reg
file back to the
mkconfig.reg
Web Kiosk Software Suite Bar Codes on page
MK2000_WebKSS_Install+SourceCode.doc
6-2.
screens are for customer use, and the
Employee Badge on page D-7
folder.
file into this folder.
My Computer\Application
file, which is part of
®
CE
Store Operations
to access the
Store
Advertisement
Table of Contents
Troubleshooting
