Lennox icomfort Wi?Fi Thermostat Owner's Manual page 23

NOTE - Firmware updates will not affect installer or user thermostat set­
tings. Both will be retained after the update.
REGISTRATION
enter your email
re-enter your email
System Desc
WI-FI SETTINGS
Wi-Fi
9:39 am January 23, 2012
connected
press to press to enable
change network / disable Wi-Fi
settings
NOTE -
If any downloads are available for the thermostat they will start downloading
Connection to server has not bee established or it has been lost. Please
wait until a connection is established.
right away. When new firmware is being downloaded or when Gelaskins are
being installed, the thermostat screen will temporarily go blank and running
Wi-Fi
9:39 am January 23, 2012
units may cease operation while the system is being reset to accommodate
the new changes. This is normal and can last a couple minutes.
Figure 43. Registering the system for online access
For any issues with Wi-Fi connections, refer to Wi-Fi Troubleshooting
Checklist 507037-01.
Register with icomfort thermostat Wi-Fi to enable
remote access and online weather information
register
(returns to
HOME
screen)
Wi-Fi
thermostat Firmware
enabled
not update
registered auto
press to change press to toggle firm­
thermostat regis­ ware update between
tration "auto" and "off"
Computer Login to the icomfort Wi-Fit Server
Figure 44. Computer Login for Online Access
NOTE - This following information is customer setup instructions and
is shown here to allow the installer to help walk the customer through
the setup process.
icomfort Wi‐Fi
Page 23
®
7-Day Programmable Communicating Thermostat