Lennox icomfort Wi?Fi Thermostat Owner's Manual page 19

Setting Humidity Controls
NOTICE
Humidifier and dehumidifier controls must be setup by the installer or
these controls will not be visible. If your system has one or both of
these features and the controls are not visible, contact your Lennox
dealer for proper setup.
If the controls have been setup, they will appear and will be ON.
Heating Mode: When a XP25 heat pump is installed, the option heating
mode is displayed. To adjust heating mode, touch the
Feature screen; then select system settings button. Touch the heating
mode icon to toggle between NORMAL and COMFORT. Default is
NORMAL.
S
Normal — Standard system operation
S
Comfort — The system reduces indoor airflow which increases supply
air temperature.
Humidification and Dehumidification Settings: To adjust humidify con­
trols (humidifier), click the button to go to the Feature screen; then select
system settings button. Some systems may have a humidifier and some
may have a dehumidifier, while still other systems may have both (as shown
in figure 35). You can control either or both from this screen.
Humidification Settings: Touch the button of the humidifier setting you
want to address; if it says humidifier is OFF, one touch will change it to ON
and bring on the set-to button. When you touch the set-to button, the arrows
appear, allowing you to change to the desired humidity setting.
Dehumidification Controls (icomfort™-enabled Outdoor Unit): Touch
the button of the humidifier controls you want to address; if it says ClimateIQ
setting DRY (off), one touch will display a selection for DRY, MODERATE
and HUMID. Selecting MODERATE or HUMID will bring on the set-to but­
ton. When you touch the set-to button, the arrows appear, allowing you to
change to the desired humidity setting.
Three climate settings are available:
S
Dry ­ The system supplies higher indoor airflow at all compressor ca­
pacities, increasing efficiency by operating at a higher sensible to total
ratio.
S
Moderate ­ The system supplies indoor airflow that balances effi­
ciency and comfort.
S
Humid ­ The system supplies lower indoor airflow at all compressor
capacities, improving humidity removal by operating at a lower sens­
ible to total ratio.
SYSTEM SETTINGS
button to go to the
heating
mode
COMFORT
Wi-Fi
Dehumidification Controls (Non-communicating Outdoor Unit): Touch
the button of the humidifier settings you want to address; if it says de-humidi­
fier OFF, one touch will display a selection for OFF, MEDIUM and HIGH. Se­
lecting MEDIUM or HIGH will bring on the set-to button. When you touch the
set-to button, the arrows appear, allowing you to change to the desired hu­
midity setting.
Three climate settings are available:
S
OFF ­ The system supplies higher indoor airflow at all compressor ca­
pacities, increasing efficiency by operating at a higher sensible to total
ratio.
S
MEDIUM­ The system supplies indoor airflow that balances efficiency
and comfort.
Page 19
dehumidification
humidification
settings
%
40
humidifier ClimateIQ
is ON setting
set to
MOD
ALL CHANGES MADE ON
THIS SCREEN ARE IN­
STANTLY SAVED.
9:39 am January 23, 2012
Figure 35. Humidification Settings
(icomfort™-enabled Outdoor Unit)
®
icomfort Wi‐Fi 7-Day Programmable Communicating Thermostat
settings
DRY
humidifier
%
50
MODERATE display
is ON
set to
HUMID
(default is ON)
current indoor humidity is 50%
?