Lennox icomfort Wi?Fi Thermostat Owner's Manual page 13

SERVICE INFORMATION
Service information is normally filled in by the installer at time of initial instal­
lation. However, you can change this information, when and if needed.
Touch any line of text to produce a keyboard and then enter any new informa­
tion. Touch the save button when finished entering information.
SERVICE INFORMATION
press any line to edit it
Dealer Name Lennox
Dealer Address 1234 Fifth St
Dealer Phone 1-800-0-LENNOX
Dealer Email dealer@hvac.com
Dealer Website www.lennox.com
Dealer Number ******
System Desc myicomfort system
System Desc
my icomfort system
Wi-Fi
9:39 am January 23, 2012
Figure 18. Service Information
click any line;
keyboard will
pop up to input
information
thermostat info
?
keyboard tool
HELP (?)
When you touch the help icon (?) the screen changes to show an array of
(?)'s located at "active" points on the screen. When you touch a (?) a pop-up
describes what you can do by pressing the active button(s) nearest it. Figure
19 shows an example of the screen and a pop-up.
indoor temperature
Change the system function to either heat
or cool (auto), heat only or cool only mode
or turn on one of the Programs. You can
also select 'edit' to enter the edit program
screen.
indoor humidity is 41%
system is cooling
Wi-Fi 9:39 am January 23, 2012
Figure 19. Typical Help (?) Screen
icomfort Wi‐Fi
Page 13
outdoor
set temp
temperature
75
80
heat
or
cool
cool-to
70
fan is AUTO
heat-to
fan is fan is
AUTO OFF
®
7-Day Programmable Communicating Thermostat
enter
away
?