Lennox icomfort Wi?Fi Thermostat Owner's Manual page 22

CREATING A WI-FI CONNECTION TO A HIDDEN NETWORK
1. When connecting to a hidden network, press the add new network icon
to continue. Enter the network name (SSID). If security encryption is
enabled, then press the security is none icon. Select either WEP,
WPA or WPA2. Using the on-screen keyboard, enter the password (se­
curity key). If the network name or security key combination is incorrect
or incorrectly type, and access to the specified network failed, a mes­
sage will alert you to retry.
Press any line to edit
network name (SSID)
password
Figure 41. Network Manual Setup
2. Press connect to complete the connection. Note that "Wi-Fi enable"
button on the Wi-Fi SETTINGS screen changes to "Wi-Fi disable".
Register the icomfort Wi‐Fi
From NETWORK SETTINGS screen, you can change to the desired net­
work as shown in figure 42. Enter security key or passphrase. "X" back to the
WI-FI SETTINGS screen.
507146-01 5/2013
none
WEP
security is
none
WPA
WPA2
®
Thermostat
NOTE NETWORK's marked with * ‐ Selecting one of these
wireless networks may result in an unreliable connection to
your thermostat. Press help "?" for tips on improving signal
strength.
choose a wireless network
NETGEAR NETWKB
type the network security key or passphrase for
Wi-Fi
connect
9:39 am January 23, 2012
Figure 42. Change Networks
REGISTRATION FOR ONLINE ACCESS
From the WI-FI SETTINGS screen, press the "thermostat not registered"
button (see figure 43). Enter homeowner email address twice and press the
register button.
A pop up screen then appears to notify the user to check their home comput­
er for instructions to complete the registration. After the server sends the
email with the network link, registration and account creation must be com­
pleted on the homeowner's personal computer.
NOTE - Time from pushing the registration button on the thermostat and re­
ceiving the consumer portal register link from your email on your computer is
from 5 to 15 minutes.
After registration has been completed, any available firmware downloads
will immediately start downloading to the thermostat.
Page 22
NETWKC NETWKD *
NETGEAR
AP Info
dis-
(returns to
WI-FI SETTINGS
screen)
add new
network