Download Print this page

Lennox icomfort Wi?Fi Thermostat Owner's Manual page 18

Touch screen programmable communicating thermostat
Hide thumbs Also See for icomfort Wi?Fi Thermostat:

Advertisement

indoor temperature
set temp
75
cool-to
70
heat to
indoor humidity is 41%
touch
cool-to
button
system is cooling
Wi-Fi
9:39 am January 23, 2012
Figure 31. Adjusting Temperature
SETTING AWAY MODE PER ZONE
If Zone 1 (master) is set for Away Mode (on the Home Screen), away mode is
enabled for the whole system (all zones) until canceled.
If zones 2, 3, or 4 are set for Away Mode on the Home Screen, the Away
Mode icon appears at the lower-right of each zone button on the Available
Zones Screen.
AVAILABLE ZONES
Den
Living Room
72
85
75
75
70
62
Press any zone button to make this thermostat contr0l that zone.
Wi-Fi
9:39 am January 23, 2012
Figure 32. Home Screen - Selecting Away Mode for Individual Zones
507146-01 5/2013
(mode
button)
enter
heat
or
cool
set temp
fan is
75
AUTO
fan is
fan is
AUTO
OFF
cool-to
use arrows
to change
temperature
alternate
cool-only button
layout
Living Room
?
?
Master Bed
Zone 3
72
85
75
75
fan is
fan is
AUTO
OFF
70
62
?
ADJUSTING AWAY MODE TEMPERATURE OR CANCEL AWAY
MODE PER ZONE
To adjust the Away Mode zone temperature setting or to cancel Away Mode
for a specific zone, from the Home Screen select the desired zone and select
the Cancel Away icon located in the upper right-hand corner of the screen.
cool
only
this zone in AWAY mode, use cancel to exit AWAY mode.
fan is
AUTO
9:39 am January 23, 2012
Wi-Fi
Figure 33. Adjusting temperature or Cancelling Away Mode with
HOW TO DISABLE ZONING
From the Home Screen, select the right arrow to proceed to the Features
screen. Select zone settings and then select zoning is ON. This will toggle
zoning to OFF. Once disabled, the status bar along the bottom of the home
screen will appear as illustrated in figure 34. Once zoning is disable the sys­
tem operating the entire home in single comfort mode.
Note - When Zoning is disabled, the in-zone thermostat are also disabled other than display­
ing current temperature. The icomfort™ logo is also display which indicates zoning is off.
9:39 am January 23, 2012
9:39 am January 23, 2012
Wi-Fi
Figure 34. Adjusting temperature or Cancelling Away Mode with
Page 18
indoor temperature
set temp
82
cool-to
60
heat to
Program Running (Away Mode)
Zoning if OFF
Program Running (Away Mode)
cancel
away
use arrows to change
temperature
?
?
?

Advertisement

loading