Download Print this page

Lennox icomfort Wi?Fi Thermostat Owner's Manual page 20

Touch screen programmable communicating thermostat
Hide thumbs Also See for icomfort Wi?Fi Thermostat:

Advertisement

S
HIGH ­ The system supplies lower indoor airflow at all compressor ca­
pacities, improving humidity removal by operating at a lower sensible
to total ratio.
Remember that the humidification only operates while in the heating mode
and dehumidification only operates while in the cooling mode.
SYSTEM SETTINGS
humidification
settings
%
heating
40
humidifier
mode
is ON
COMFORT
set to
ALL CHANGES MADE ON
THIS SCREEN ARE IN­
STANTLY SAVED.
Wi-Fi
9:39 am January 23, 2012
Figure 36. Humidifier Controls (Non-Communicating Outdoor Unit)
Connecting to a Home Wi-Fi Network
Check the router utility program or contact service provider for help.
When determining the location for the Wi-Fi thermostat, be sure it is in an
area near enough to the homeowners Wi-Fi router to ensure good commu­
nications signal between the thermostat and the router. (Hint: use a smart
phone with Wi-Fi and Wi-Fi finder application to locate and determine signal
strength.)
NOTE - Thermostat will not be able to reliable connect to a router if the
received signal strength indicator (RSSI) is -70 or greater.
Secure Connection Recommended!
and set to operate in wireless network "802.11b" mode. Check router
utility program or contact service provider for assistance.
507146-01 5/2013
dehumidification
settings
OFF
de-
%
50
MEDIUM
humidifier
MEDIUM
set to
HIGH
(default is ON)
current indoor humidity is 50%
Verify the router is capable of,
ENABLING WI-FI
To enable the Wi-Fi feature to communicate with a wireless router
1. Press and release "Wi-Fi" in the lower left corner of the HOME screen.
2. Press the Wi-Fi enable button.
indoor temperature
humidifier
display
is ON
indoor humidity is 41%
Wi-Fi
Wi-Fi
9:39 am January 23, 2012
?
WI-FIL SETTINGS
WI-FI
Press to enable /
disable Wi-FI
Wi-Fi
9:39 am January 23, 2012
3. Press next as many times as necessary; then press accept after read­
ing the User Agreement.
Page 20
set temp
75
cool-to
72
Heat-to
system is cooling
Zone 1
Figure 37. Press Wi-FI
Thermostat is not connected to the Wi-FI network
disable
Zone 1
Figure 38. Enable Wi-FI
outdoor
temperature
enter
80
away
heat
or
cool
fan is
AUTO
fan is
fan is
AUTO
OFF
?
X
?

Advertisement

loading