Adding Safety Camera; Updating Safety Camera Data - Mio MiVue 5 series User Manual

Adding safety camera

NOTE: You can add a custom safety camera only when a GPS fix is established.
Your recorder allows you to customise the safety camera database. You can add up to 100
custom safety cameras in your recorder.
Follow the steps to configure a custom safety camera:
1. To add a custom safety camera in the current location, tap
2. The next time when you pass by the location, you will receive alerts by the recorder.
The screen will display the visual alert (the custom safety camera will be shown as the
icon), and you will also receive audio warnings (Beep or Mute).
3. To view the information of the user-added safety camera, tap
(Custom SafetyCam) and then tap the safety camera that you want to check.
The Location and Created Time of the safety camera will be displayed on the screen.
4. To delete the custom safety camera, tap

Updating safety camera data

MiTAC does not warrant that all types and locations of safety camera data are available, as
cameras may be removed, relocated or new cameras installed.
Occasionally MiTAC may offer you updates of safety camera data. Visit the MiTAC website
for available downloads, and follow the instructions to complete update.
.
14
on the recording screen.
> > >