Table of Contents
Advertisement
●
When your car passes through a safety camera, you will be notified by a
different beep alert.
Adding a safety camera
✎
You can add a custom safety camera only when a GPS fix is established.
Your dash cam allows you to customise the safety camera database. You can add
up to 100 custom safety cameras in your dash cam.
Follow the steps to configure a custom safety camera:
1.
To add a custom safety camera in the current location, press
recording screen.
2.
The next time when you pass by the location, you will receive alerts by the
dash cam.
3.
To view the information of the custom safety camera, select
> Custom SafetyCam and then select the safety camera that you want to
check.
4.
Press
to remove the custom safety camera from the dash cam.
Updating safety camera data
MiTAC does not warrant that all types and locations of safety camera data are
available as cameras may be removed, relocated or new cameras installed.
Occasionally, MiTAC may offer you updates of safety camera data. Visit the Mio
website for available downloads and follow the instructions to complete update.
on the
> SafetyCam
13
Advertisement
Table of Contents
