Adding A Safety Camera; Updating Safety Camera Data - Mio N548 User Manual

Adding a safety camera

Note: You can add a custom safety camera only when a GPS fix is established.
Your dash cam allows you to customise the safety camera database. You can add
up to 100 custom safety cameras in your dash cam.
Follow the steps to configure a custom safety camera:
1. To add a custom safety camera in the current location, press
recording screen.
2. The next time when you pass by the location, you will receive alerts by the dash
cam.
3. To view the information of the user-added safety camera, select
SafetyCam > Custom SafetyCam and then select the safety camera that you
want to check.
4. Press to remove the custom safety camera from the dash cam.

Updating safety camera data

MiTAC does not warrant that all types and locations of safety camera data are
available as cameras may be removed, relocated or new cameras installed.
Occasionally, MiTAC may offer you updates of safety camera data. Visit the MiTAC
website for available downloads and follow the instructions to complete update.
19
on the
>