Operating Basics; Turning The Recorder On And Off; Setting The Date And Time - Mio MiVue 5 series User Manual

Operating basics

Turning the recorder ON and OFF

Complete the installation according to the instructions in the "Using your recorder in a
vehicle" section.
ƒ Once the vehicle engine is started, the recorder automatically turns on. By default, the
recording will automatically start in few seconds after start-up.
ƒ When a GPS fix is established, the GPS signal icon will show on the top-right corner
of the screen. The number of the vertical bars in the icon indicates the strength of the
signal.
ƒ When the recorder is turned on, press and release the Power key to switch the LCD
screen on/off.
ƒ To manually turn the recorder on and off, press and hold the Power key for 2 seconds.
Restarting the recorder
Occasionally, you may need to perform a hardware reset when the recorder stops
responding; or appears to be "frozen" or unresponsive.
To restart the recorder, press and hold the Power key until the system is shut down; press the
Power key again to turn the recorder on.

Setting the date and time

To make sure of the correct date and time for your recordings, please check the date and
time settings before you begin recording.
1. Tap to access the Settings Menu.
2. Tap > >
3. Select (Automatic) or
(Date / Time).
(Manual):
9