Adding a safety camera
Note: You can add a custom safety camera only when a GPS fix is established.
Your recorder allows you to customise the safety camera database. You can add up to 100
custom safety cameras in your recorder.
Follow the steps to configure a custom safety camera:
1. To add a custom safety camera in the current location, press
2. The next time when you pass by the location, you will receive alerts by the recorder.
3. To view the information of the user-added safety camera, select
Custom SafetyCam and then select the safety camera that you want to check.
4. Press
to remove the custom safety camera from the recorder.
Updating safety camera data
MiTAC does not warrant that all types and locations of safety camera data are available as
cameras may be removed, relocated or new cameras installed.
Occasionally MiTAC may offer you updates of safety camera data. Visit Mio website (
for available downloads and follow the instructions to complete update.
mio.com)
13
on the recording screen.
> SafetyCam >
www.
en