System Setting Screen - JVC KY-F70B Instructions Manual

SYSTEM SETTING screen

Menu item
ON SCREEN Used to set the text which is displayed in the video signal
output to the MONITOR terminal.
ALC EEI:
MEMORY NUM: displays the memory image number
BOTH:
OFF:
FRZ DISPLAY Used to set whether to display FREEZE on the screen
when in operation.
ON:
OFF: no display
PRIORITY Used to set which device has output priority when both
printer and MO or Zip
PRINTER: output priority is given to the printer.
DISK:
MONITOR Use to set the resolution of the image displayed on the
monitor in the VGA mode.
FINE:
DRAFT: 640 × 240 pixels (however, the image is updated
Function/variable range
displays the ALC and EEI status during
REC mode and the iris value during
AUTO IRIS mode.
during the PLAY mode.
displays both conditions during REC
mode, and displays memory image
number during PLAY mode.
no text is displayed for either REC mode
or PLAY mode.
MEMO
"----" is shown in cases when ALC, EEI, and AUTO IRIS all fail to function.
displays FREEZE on the screen
®
output priority is given to the MO or Zip
640 × 480 pixels (the image is updated 7.5 times
per second)
30 times per second)
MEMO
• This menu item cannot be selected when the unit is set the SXGA mode
using the dip switches located on the rear.
(--------- is displayed)
• When set to DRAFT, it automatically switches to the FINE mode when the
following settings are made, and returns to the original setting when set to
a setting other than the following.
When the shutter mode is set to RANDOM.
When the shutter speed is set to 1.4 s or slower.
• When switching between FINE and DRAFT, the image shown on the screen
may be disturbed momentarily.
drive are connected.
Default value
MEMORY
NUM
ON
DISK
®
drive.
FINE
E59