Introduction; Features; Accessories And Attachments - JVC KY-F70B Instructions Manual

1. Introduction

Features

This digital camera uses three 1.45 million pixel 1/2 inch 3-CCD.
Newly developed 1/2 inch C mount Dichroic prism for the colour separation prism.
The semi-animation of 1360 × 1024 pixels can be output with analog signal (7.5 frames/sec-
ond) and the still picture of 1360 × 1024 pixels can be captured.
Image capturing capability using a capture board since video signals are processed in real-
time by the built-in DSP and outputted as RGB analog signals of 7.5 frames/sec.
Monitor output can be scan-converted to 640 × 480 pixels for output to a VGA monitor.
Using the provided special application software [KY-SCSI] allows connection of a personal
computer via SCSI connection for remote control, display of preview image and capture of still
images.
Output digital still images to an MO drive, Zip
tion.
Remotely control your PC using RS-232C connection. (software not included)

Accessories and attachments

Power cable (2 m)
For connecting with AC
adapter 8-pin cable
( page 18)
Clamp filter
For power cable
( page 18)
Instruction book
E6
Remote plug (10-pin)
REMOTE terminal plug
( page 12)
Mini screwdriver
For replacing battery
( page 16)
Wire clamp (5 units)
For clamping rear cables, etc.
® drive or compatible printer using SCSI connec-
Battery (CR2025)
For time and date backup
(
Replace the battery once two
year.
Floppy disk (3 disks)
Special application software
[KY-SCSI] and TWAIN driver
For details, see the "Readme.txt"
file of the software
(
page 16)
page 66)