Before Recording; Basic System 1 - JVC KY-F70B Instructions Manual

2. Before recording

Basic system 1

While checking the images from the camera on the monitor, output the images to an MO disk,
®
Zip disk or printer.
Connect to the
power supply
( page 18)
DC IN
• Be sure to terminate the last device on the SCSI bus.
• For the power supply, always use the AA-P700 AC adapter.
CAUTION
Use a 1/2 inch C mount microscope adapter compatible to the used microscope.
To avoid damage to the unit, always use an adapter that is 4mm or less from
the lens mount side.
E14
AA-P700
AC ADAPTER AA-P700
POWER
ON
OFF
AC adapter
MONITOR
SCSI
Microscope
adapter
Connect the PC monitor (VGA)
AC
( page 19)
VIDEO IN
MO drive
or Zip ®
ALARM SHEET
POWER
Compatible Printer
(Mitsubishi CP-700DSU/E)
VGA monitor
Connect the MO/Zip
drive ( page 20)
drive
CP700DSA MITSUBISHI
PAPER FEED & CUT COPY ONLINE
PAPER DATA
Connect the printer
OPEN
( page 21)
CP-770DW
CP-800DW
4mm or less
Adapter
®