Process (2/3) Screen - JVC KY-F70B Instructions Manual

PROCESS (2/3) screen

Menu item
FLARE (R) Rch compensation of the black level when flaring effect
occurs and the entire screen becomes washed out from
the light entering the lens reflecting diffusely. Perform this
function along with FLARE (B).
Deeper red: increase the number
Paler red:
[Variable range: –128 ~ 127]
FLARE (B) Bch compensation of the black level when flaring effect
occurs and the entire screen becomes washed out from
the light entering the lens reflecting diffusely. Perform this
function along with FLARE (R).
Deeper blue:
Paler blue:
[Variable range: –128 ~ 127]
ABL Used to set whether to automatically adjust the black level
of the video when recording. Adjust when the black level
of the video during recording fluctuates.
NORMAL: executes ABL (Auto Black Level) adjustment
ADJUST:
LEVEL The black level can be adjusted only when ABL is set to
ADJUST.
Decrease the black level (higher compensation):
Increase the black level (lower compensation):
[Variable range: –25 ~ 25]
PIXEL COMP. Setting for deciding whether or not white spot compensa-
tion should be performed.
OFF: White spot compensation is not performed.
ON: White spot compensation is performed. (
PIXEL For detection of positions of white spots.
(
CHECK
Function/variable range
decrease the number
increase the number
decrease the number
using a fixed value.
the compensation of the ABL adjustment can
be changed using the LEVEL submenu item
below.
increase the number
decrease the number
page 34 White spot compensation)
Default value
0
0
NORMAL
0
OFF
page 34)
E57