System Setting Screen - JVC KY-F1030U Instructions Manual

5. Menu screen settings (continued)

SYSTEM SETTING screen

[ ] indicates the factory setting
Item
AE DISPLAY
FRZ DISPLAY
FRZ CANCEL
TEST PATTERN
LEVEL
When "BAR"/
"IMPULSE"
is selected
MENU RESET
E40
Set Value
[OFF] Used to set whether the ALC, EEI and IRIS values are
ON displayed on the analog output screen.
OFF:
ON:
[ON] Used to set whether the "FREEZE" indicator is shown on
OFF the screen at the time of trigger input.
ON:
OFF:
[MANUAL] Sets the method for canceling the FREEZE when the
AUTO (1s) monitor screen is in FREEZE condition when connection
AUTO (3s) is made through digital output.
AUTO (5s) MANUAL : Cancelled by trigger input.
OFF AUTO(1s) : Cancelled after 1 second.
AUTO(3s) : Cancelled after 3 seconds.
AUTO(5s) : Cancelled after 5 seconds.
OFF
* When set to "AUTO" or "OFF", the displayed screen can
be updated by trigger input during the FREEZE condi-
tion.
[BAR] Sets the test pattern type output when the function set-
RAMP ting switch No.1 <TEST PATTERN> is set to "ON".
IMPULSE BAR
RAMP
IMPULSE : "IMPULSE" pattern is output.
[0.7V] Sets the level of the color signal bar output from the KY-
0.57V 1030's [ANALOG OUT] connector.
0.7V:
0.57V:
Resets all the set values of menus to the initial values.
page E43, Resetting menu settings
Contents
No on-screen-display
On-screen-display
Displayed
Not displayed
: Not cancelled.
: "BAR" pattern is output.
: "RAMP" pattern is output.
0.7V test signal is output
0.57V test signal is output