White Balance Adjustment - JVC KY-F70B Instructions Manual

3. Settings and adjustments for recording (continued)

White balance adjustment

Since the colour of light (light temperature) changes depending on the light source, readjust the
white balance (AUTO WHITE) when the light source of the object changes.
MENU DOWN
UP MODE/SET
SCSI
REC
MODE
SEND AW/SEL
MENU UP DOWN SET
PLAY
FREEZE
LENS
MONITOR
REMOTE
DC IN
POWER
ON 1 2 3 4
SEE INSTRUCTION MANUAL
- - - REC MENU - - -
1 : EXPOSURE . .
2 : WH I TE BA L ANCE . .
3 : FREEZE . .
4 : PROCESS . .
5 : SYSTEM SET T I NG . .
REC MENU screen
Menu item Set value
- - - WHI TE BA LAN
COLOR TEMP
: 3 2 0 0 K
WH I TE BA L : AUTO
L EVE L ( R ) : 0
: 0
L EVE L ( B )
: OF F
SHADING MODE
L EVE L ( R )
:
:
L EVE L ( G )
:
L EVE L ( B )
WHITE BALANCE screen
E30
1.
REC lamp
2.
3.
4.
CE - - -
Pressing the MENU button without pressing the SET button
will not register the set value and the unit will return to the
setting prior to the change.
5.
6.
Press the MODE button to enter the REC mode (REC
lamp on), then press and hold the MENU button for at
least 2 seconds to display the REC MENU screen.
( page 10 MODE button)
(If the button is pressed for less than 2 seconds, the
REC MENU (QUICK) screen will appear.
Press the UP or DOWN button to select 2. WHITE BAL-
ANCE (the text will be displayed in purple when se-
lected), then press the SET button.
The WHITE BALANCE screen will appear.
Press the UP or DOWN button to select COLOR TEMP
(the text will be displayed in purple when selected), then
press the SET button.
The set value will be displayed in purple, indicating that
it can be changed.
Press the UP or DOWN button to select the setting de-
pending on the usage environment.
3200K: when using low temperature lighting such as a
halogen lamp, etc.
5200K: when using high temperature lighting under
the sunlight, etc.
Pressing the SET button will register the setting in the
main unit memory. The set value will be displayed in
white.
MEMO
Press the UP/DOWN and SET buttons to set WHITE
BAL in the WHITE BALANCE screen to AUTO.
After pressing the MENU button twice to return to the
normal screen, place a white object with the same light-
ing conditions as the object to record, then zoom in to
display white near the center of the screen (more than
80% area of screen).
Page 49)