Playing back images from the memory
It is possible to play back images stored in the camera's memory. When in the VGA mode,
images will be displayed in 640 × 480 pixels, regardless of whether in the FINE or DRAFT mode.
SEL
MODE
SCSI
REC
MODE
SEND
AW/SEL
MENU
UP
DOWN
SET
PLAY
FREEZE
LENS
MONITOR
REMOTE
DC IN
POWER
ON 1 2 3 4
SEE INSTRUCTION MANUAL
Returning to the REC mode
MODE
SCSI
REC
SEND
AW/SEL
MODE
MENU
UP
DOWN
SET
PLAY
FREEZE
LENS
MONITOR
REMOTE
DC IN
POWER
ON 1 2 3 4
SEE INSTRUCTION MANUAL
1.
Press the MODE button to enter the PLAY mode.
The PLAY lamp will light and the latest image stored
will be displayed on the monitor.
(
At this time, the memory image no. will be displayed
PLAY lamp
at the lower right corner of the screen.
MEMO
• It is not possible to enter the PLAY mode directly from the
FREEZE mode. First cancel the freeze before entering the
PLAY mode.
• The character display contents of the monitor screen can
be changed by selecting ON SCREEN in the SYSTEM SET-
TING screen. (
2.
Pressing the SEL button will switch in sequence from
latest image to the previously Stored images.
3.
Images can also be output from memory to an MO/Zip
drive or printer.
(
page 38 Saving images from the memory to an MO/Zip
(
page 39 Outputting images from the memory to a printer )
To return to the REC mode after displaying captured im-
ages, press the MODE button to light up the REC lamp.
REC lamp
page 10 MODE button)
Page 59)
®
®
disk )
E37