Using The Touch Screen - JVC GC-PX10U Detailed User Manual

Using the Touch Screen

There are two ways to operate the touch screen, namely "tap" and "drag". The following are
some examples.
Tap the displayed button (icon) or thumbnail (file) on the touch screen to make selection.
A
Drag the thumbnails on the touch screen to search for the desired file.
B
Recording Screen
Memo
The touch screen of this unit is pressure-sensitive. When the touch screen does not
0
respond smoothly, apply slightly more force to your fingertip.
Tap the buttons (icons) on the touch screen accurately. The buttons may not respond
0
if they are not tapped on the right area.
Do not press or rub with excessive force.
0
If you apply a protect sheet or a sticker, the touch screen may not respond smoothly.
0
Do not operate the touch screen using an object with a sharp or hard tip.
0
Pressing two or more places at a time may cause a malfunction.
0
Perform "TOUCH SCREEN ADJUST" if the reactive area of the screen is misaligned
0
with the touched area. (Adjust by lightly tapping with a corner of an SD card, etc. Do
not press with an object with a sharp tip or do not press hard.)
Adjusting the Touch Screen
A Press the MENU button.
B Tap "Q".
C Tap "TOUCH SCREEN ADJUST".
D Tap "+". (3 times in total)
Keep tapping "+" as its position changes with every tap.
0
E Tap "+" again to confirm the adjusted positions. (3 times in total)
Keep tapping "+" as its position changes with every tap.
0
If areas on the adjustment screen other than the "+" mark are tapped, errors will occur.
0
In this case, try again from step 4.
F Tap OK.
Setting ends and returns to the menu screen.
0
10
Playback Screen
00:01:23
Index Screen
00:12:34
2011 2011