Table of Contents
Advertisement
Available languages
Available languages
PROCESS screen
[ ] indicates the factory setting
Item
DETAIL
LEVEL
When "ON" is
selected
NOISE SUP.
When "ON" is
selected
GAMMA
MASTER BLACK
FLARE
LEVEL (R)
When "ON" is
selected
L E V E L ( B )
When "ON" is
selected
Set Value
[ON]
Used to set whether to emphasize details (contours).
OFF
ON:
OFF:
–7
When [DETAIL] is set to "ON", the emphasis level of the
–6
detail is adjusted.
•
Increasing the value:
[NORMAL]
Decreasing the value: Softens details
•
7
[OFF]
Reduces noise in the video signal.
LOW
OFF:
MIDDLE
LOW, MIDDLE, HIGH: Noise reduction is performed.
HIGH
The reduction rate increases in the order of LOW
MIDDLE
MEMO
Note that when the noise reduction is increased, de-
tails may get lost in the coarse parts of the image.
[ON]
ON:
OFF
OFF:
–32
Used to adjust the pedestal level (master black), which is
–31
the standard of black when the lens is capped. To see
•
more details in black areas, raising the pedestal level will
[0]
brighten the entire screen.
•
Increasing the value:
31
Decreasing the value: Lowers the pedestal level
[ON]
Compensation of the black level when flaring effect oc-
OFF
curs and black areas are tinted with color due to irregular
reflection of light entering the lens.
–32
Compensation of the black level of Rch
–31
Increasing the value: Red tint becomes weaker
[NORMAL]
Decreasing the value: Red tint becomes stronger
•
31
–32
Compensation of the black level of Bch
–31
Increasing the value:
[NORMAL]
Decreasing the value: Blue tint becomes stronger
•
31
Contents
Detail emphasis is performed.
Detail emphasis is not performed.
Sharpens details
Noise reduction is not performed.
HIGH.
The video signal is compensated to make the
image viewed on the screen natural.
No compensation and the video signal is out-
put linearly.
Raises the pedestal level
Blue tint becomes weaker
E37
Advertisement
Chapters
Table of Contents
