WLAN Status (Continued)
Table 2-2
Icon
Good signal strength
Poor signal strength
Out-of-network range (not
associated)
Battery Status
Table 2-3
Icon
Adjusting the Volume
To adjust the beeper volume and the audio volume on the SB1, touch
decrease volume. Note that when using a headset, the headset also has a volume control.
PTT Express Settings
Use the PTT Express Setting to enable PTT Express and select a channel. For information on using PTT
Express see
PTT Express Voice Client on page
More Setting
Use the More Settings options to calibrate the screen, set beeper settings, view software versions and other
advanced settings.
Screen Calibration
If when touching the screen misalignment is observed, the user can re-calibrate the screen.
On the Settings screen, touch
1.
Touch Calibrate Screen.
2.
Carefully press and briefly hold finger tip on the center of the target. Repeat the procedure as the target
3.
moves and stops at different locations on the screen. This enters the new calibration settings.
Status
WLAN network is ready to use.
WLAN network is ready to use. Performance may not be
optimum. Notify the network administrator that the signal
strength is "Poor".
No WLAN network connection. The SB1 beeps and this icon
appears on the Home screen whenever it has lost or is out of
range from the wireless network. Notify the network
administrator. The SB1 beeps when it comes back in range of
the wireless network.
25%
50%
75%
100%
2-15.
.
Action
Description
to increase volume or
Operation 2 - 13
to