Before You Change The Preset Programmes - Danfoss TS715 Si Installation & User's Instructions

Before you change the preset programmes

Your installer will have set your unit to operate in one of the
following modes:
5/2 day - one set of programmes for weekdays and another
for weekends (page 17-18)
7 day - diff erent settings for each day of the week
(page 19-20)
24 hour - one set of programmes for the whole week
(page 21)
!
See INSTALLER SETTING tick box on inside fl ap label to
ascertain which mode your unit is set .
Please Note
The unit must be programmed in sequence and ON/OFF
times cannot be set out of sequence.
If you want to leave a preset time as it is, simply press NEXT
to move on to the next setting.
Your installer will have set your unit to programme either
2 or 3 ON/OFFs per day. If your clock has been installed to
allow 3 ON/OFFs and you do not wish to use one of the
ON/OFF settings, simply programme the ON time to be the
same as the OFF time and the setting will not operate.
16