Size And Position Menu - Runco Video Xtreme VX-40d Owner's Operating Manual

Section 3: Operation

Size and Position Menu

In the Size and Position menu,
➤
you can increase or decrease
the size of your image, change
its proportion (aspect ratio),
move the image to a specific
area of the screen, and refine
other related parameters. Use
Size and Position controls to
match the image precisely to
the screen used at the site.
Refer to "Using Slidebars and Other Controls" (earlier in this section) if you need help using
any of the options and controls. Changes made in the Size and Position menu are applied
immediately and are saved when you exit the menu (press Exit or Menu ).
Resize Presets
Select a Resize Presets option to quickly display an image in its native resolution or to
automatically resize an image to closely fill the projector's native resolution of 1400 x 1050,
or to optimize the width or height
of your display. Size, Position
and Blanking parameters will
automatically adjust accordingly,
or if Blanking is set first, which
defines an Active Input Area,
Resize Preset scaling will occur
in this region of interest only.
Resizing options are explained in
detail below.
WHAT IS THE RESIZING DEFAULT? By default when displaying a new source, your
image will utilize as much of the projector's display area (1400 x 1050) as possible for the
type of incoming source data, but with minimal or no changes to aspect ratio. See Select
"Default" below.
WHEN "CUSTOM" APPEARS: The "Custom" re-size descriptor automatically appears
in the Size and Position menu when any of the values for Size, Vertical Stretch, H-Position,
V-Position or Blanking do not correspond to those for a preset. This option is not offered
in the Resize Presets pull-down list.
• Select "DEFAULT" for most sources (factory default). The image will be centered and
displayed as large as possible depending on the type of source, as described below:
✔A 5:4 graphic image will enlarge to fill the screen height, and be centered between
narrow black side bars.
✔A video image or 4:3 graphic image will enlarge to fill the screen.
✔An anamorphic (16:9) image will fill the width and be centered between black
bars on top and bottom.
44