Size And Position Menu; Resize Presets: No Resizing - Runco Signature Cinema SC-1 Owner's Operating Manual

Installation

Size and Position Menu

Auto Setup also optimizes the following settings, based on the characteristics of the
incoming signal:
• Pixel Tracking
• Pixel Phase
• Size and Blanking
• Vertical Stretch
• Position
• Input Levels
If additional fine-tuning is necessary after performing an Auto Setup, continue with the
next section.
➤
In the Size and Position Menu, you can increase or decrease the size of your image,
change its proportion (aspect ratio), move the image to a specific area of the screen, and
refine other related parameters. Use Size and Position controls to match the image
precisely to the screen. Changes made in the Size and Position menu take effect
immediately and are saved when you exit the menu.
Resize Presets: Select a Resize Presets option to quickly display an image in its native
resolution, automatically resize an image to closely fill the projector's native resolution or
optimize the display width or height.
The native resolution is 2048 x 1080 (1.90:1 native aspect ratio).
Note
Size, Position and Blanking parameters automatically adjust accordingly. If Blanking is set
first, which defines an Active Input Area, Resize Preset scaling occurs in this region of
interest only.
The default setting is either No Resizing or Custom, depending on the input signal
resolution. Do not change it unless specifically instructed to do so by Runco
Technical Support.
• No Resizing: Select No Resizing to display the image in its native resolution, which
may not match the projector's resolution. For example, for a computer display with a
native resolution of 800 x 600, "No Resizing" will use the central 800 x 600 pixels and
have a black border— the black border areas are unused areas.
No Resizing
SVGA 800x600
2048
1080
Active Image Area
Unused Pixels
Figure 3-32. Resize Presets: No Resizing
The "native" aspect ratio is with the primary lens only. With an
anamorphic lens in the light path, the aspect ratio is 2.35:1.
Source Type
NTSC
2048
1080 1080
Active Image Area
Unused Pixels
60
HDTV 720p
2048
1080
Active Image Area
Unused Pixels Unused Pixels
Runco SC-1 Owner's Operating Manual
HDTV 1080i
2048
Active Image Area