Runco Video Xtreme VX-40d Owner's Operating Manual page 36

Section 3: Operation
Slidebars in menus — The current value for a given parameter,
such as size or vertical stretch, appears to the left of its slidebar
icon (adjustment window). This number often expresses a percentage, or it may have
units associated with it (such as pixels, degrees Kelvin, etc.), depending on the specific
option. Press to gradually adjust the setting up or down—both the number and the length
of the bar change accordingly. Hold for continuous adjustment. Or press to activate a
slidebar text box for specific number entry via the keypad, then press to save (or press
Exit to cancel).
"Direct" slidebars — For quick access, you can access Gamma, Brightness, and
Contrast slidebars without traveling the menu system. For example, simply press Cont to
immediately display the same contrast slidebar accessed with the Contrast option in the
Image Settings menu.
Use the arrow keys to adjust a direct slidebar, or press and enter a specific number from
the keypad , then Enter to save (or Exit to cancel). When you are done, press Exit to save
and return to your presentation.
NOTES: 1) You can still adjust a direct slidebar as usual if the display is turned off (see OSD
or Menu Preferences menu) — the slidebar just won't be visible. 2) A direct slidebar
disappears if it is not used within 5 seconds.
Checkboxes — Conditions are present if its adjacent
checkbox contains a checkmark. To toggle the checkbox,
simply highlight and press , or highlight and use to check and to uncheck. If a checkbox
is numbered, simply enter its number to immediately toggle the checkbox.
Pull-down lists — To see a pull-down list of options available for a given parameter
labeled with a ▼, you can:
• Highlight it and press (Enter)
• Or enter the menu option number.
Use or keys to navigate up and down within the list (the current choice is noted with a
small '). Press to choose an option from the list, if desired.
If you prefer to quickly scroll through a list without first pulling it down, highlight the
option and use . Press when the desired choice appears.
36
Figure 3.7 Example of Pull-Down List