What Channels Are Defined So Far - Runco Video Xtreme VX-40d Owner's Operating Manual

Section 3: Operation
What Channels
Are Defined So Far?
All available channels are
➤
listed in the Channel Setup
menu, which describes
how each channel can be
accessed and which serves
as the gateway for editing,
copying and
channels.
From the presentation level press Menu to display the Main menu. To display the Channel
Setup menu, press 3 , or move the highlight to the Channel Setup option and press.
The Channel Setup menu will appear (see sample at right), with the active channel
highlighted.
WHAT APPEARS IN CHANNEL SETUP MENU? This menu
lists all channels defined so far and indicates where they are
connected on the input panel. The far left column lists channel
numbers currently defined. The values in the far right columns
indicate horizontal and vertical frequencies—if someone has defined a name for this
channel, it appears here instead. Remaining columns contain details pertaining to each
channel setup, such as its switcher number (always 0 = projector), slot location, a variety
of icons indicating access to each channel, and an abbreviated description of each signal
type. See Editing a Channel Setup for details.
NOTE: If you have more than a handful of channels, use and to see the remaining channels
not visible in the initial display of channels.
SIGNAL TYPE — Either channel list, whether the Channel key list or the Channel Setup
menu, identifies signal types in a shortened form as defined below. These descriptors
indicate what signal information the projector uses to identify a match for a given channel,
and are preceded by either an "i" (interlaced signals) or "p" (progressive signal"). See Table
3.2.
deleting
Figure 3.9. All Channels Appear in the
Table 3.2. Abbreviations for Signal Type
Abbrev. Signal Type
4WH Composite (4 wire) on HC input
4WV Composite (4 wire) on V input
SG Sync-on-green
5W Separate H,V
5WR Separate H,V swapped
SVid S-Vid
CVid Composite Video
Dig Digital
40
Channel Setup Menu