Adjusting Projector Height - Runco Video Xtreme VX-40d Owner's Operating Manual

Section 2: Installation and Setup

Adjusting projector height

You can modify the height of the projector to remedy a slightly unlevel mounting surface
by adjusting the two feet threaded into the front bottom chassis. Turn each foot clock-
wise or counterclockwise until the project is level on all sides. (Figure 2.7.)
TURN
Adjust projector feet manually.
Figure 2.7
Folded Optics
In rear screen applications where space behind the projector is limited, a mirror may be
used to fold the optical path. See Figure 2.8. The position of the projector and mirror must
be accurately set — if considering this type of installation call your dealer for assistance.
Figure 2.8
19