Composite / S-Video Input Module; Dvi Input Module - Runco Video Xtreme VX-40d Owner's Operating Manual

Appendix D: Optional Input Modules
Composite / S-Video
Input Module

DVI Input Module

The module receives either composite video or S-video input signals from tape or disk
➤
players (do not connect both types of signals simultaneously). Video inputs are 75Ω
terminated. Video outputs are provided for buffered loop-through to another display
device.
Composite/S-video Features
• BNC connectors for composite RGB signals
• 4-pin mini-DIN connectors for S-Video signals
• buffered loop-through video outputs
NOTES: 1) This interface is not a decoder. NTSC, PAL, or SECAM signals must connect
to the video decoder installed at INPUT 3 / INPUT 4. 2) The audio connectors are not
functional. 3) For use with this projector, do not connect both composite video and S-
video signals to the Composite / S-Video Input Module–connect one or the other, even
when plugged into a switcher.
This module can display digital video input signals conforming to the DVI (Digital Visual
➤
Interface) single-channel standard.
Features
• supports Digital Visual Interface (DVI) single-channel
• supports VESA
• provides an active-loop-through using a DVI connector (conforming to the DVI
Specification)
Extended Display Identification Data (EDID™)
®
100