Installation; Installation Overview; Front Panel Features - Extron electronics DVI DA2 User Manual

Installation

This section provides information on:
•
•
•

Installation Overview

Both distribution amplifiers can be placed on tabletops, or mounted under furniture or in
racks by following these steps:
1.
2.
3.
4.

Front Panel Features

The front panels of the DVI DA2 and DVI DA4 are identical and shown in the illustration
below.
Figure 2.
a
Installation Overview
Front Panel Features
Rear Panel Features
Turn off all electrical equipment. Make sure that the input sources, the DA and
the output display(s) are all turned off and all power sources and signal cables are
disconnected.
Mount the unit as described in the
Connect the cables (see "DVI Connections" on page
Plug in the power supply (see
devices.
1
DVI DA2 and DVI DA4 Front Panel (both models are identical)
LED indicator — On both the DVI DA2 and DVI DA4, the LED indicator lights when the
unit is receiving power.
"Mounting" section.
5).
page 4), then turn on the display devices and input
DVI DA2 and DVI DA4 • Installation
DVI DA SERIES
DVI DISTRIBUTION AMPLIFIER
3