Operation - Extron electronics DVI DA2 User Manual

Operation

This section of the manual provides information on:
•
•
Operation
1.
2.
3.
4.
NOTE: Output 1 (Local Monitor) is used as a DDC reference and must be connected to
5.
Operation
Troubleshooting
Connect the power supply (page
Connect and power on the local monitor
Connect and power on any other output displays
Connect and power on the source device.
the distribution amplifier before the source device is powered on. If the source
device cannot communicate with the local monitor when it is being powered
on, it may not be able to send a video signal or the signal may have the wrong
resolution or refresh rate.
If there are any problems, consult
4).
5).
(page
5).
(page
the Troubleshooting section on page
DVI DA2 and DVI DA4 • Operation
8.
7