Setting Language; Data Setup; Setting Data Function; Audio - Motorola MTM5400 Feature User Manual

5.7.3.1 Setting Language

Procedure Steps
1 From the home screen, press MENU key.
Select Setup → Language.
2
3 Select desired language.

5.7.4 Data Setup

This menu item allows you to set up your radio to transmit and receive data from the external device.
To connect your radio accessory connector to the external device, use cable PMKN4104. The external device must
run an application complying with the TETRA standards.
• Data services are available only in TMO Mode.
• Data services are blocked in TXI Mode.

5.7.4.1 Setting Data Function

Procedure Steps
1 From the home screen, press MENU key.
Select Setup → Data Setup.
2
3 Select one of the following:
• Voice Only — Your radio receives and transmits voice calls only.
• Data Only — Your radio acts as a modem. It rejects incoming and outgoing voice calls (except for
Emergency Calls), status and text messages.
• Voice & Data — Your radio acts as a modem but voice calls have priority over data calls and can
interrupt them.

5.7.5 Audio

This menu item allows you to adjust your radio audio settings.

5.7.5.1 Volume Adjustment Mode

You can set the volume to Individual or to Common. When it is set to Individual, the audio for Duplex, Simplex,
Earpiece, Speaker and Keypad can be set per user preferences. When set to Common, the audio have one
setting for all items.
-
5.7.3.1 Setting Language
5-25