Table of Contents
Advertisement
Feature User Guide
Choose the Type of the new number and press Done.
9
5.4.2.6 Calling a Number in a Message
Prerequisites: Embedded Number feature is enabled by your service provider.
When and where to use: You can return a voice call to the sender of a message or to any number that is embedded
in the message text.
Procedure Steps
1
From the home screen, press MENU key.
2
Select Messages → Inbox.
Highlight the required message and select Read.
3
4
Press the PTT button.
Radio displays a list of the numbers (including the senders number).
5
6
To call, highlight to the required number and press the PTT button or SEND button.
Select Ctype to choose the type of call (Private, Phone, or PABX).
7
8
Press the PTT button or SEND button.
5.4.2.7 Making a Group Call on a Talkgroup of the Message Originator
Prerequisites: Embedded Number feature is enabled by your service provider.
When and where to use: You can start a group call with the message originator talkgroup.
Procedure Steps
1
From the home screen, press MENU key.
2
Select Messages → Inbox.
Highlight the required message and press the PTT button.
3
5.4.2.8 Immediate Message
When the new immediate message is received, radio plays the New Mail Received tone and displays the content
overlapping your previous screen. All immediate messages are stored in the Inbox. If the radio is in PIN Lock state,
immediate message is displayed after correct PIN is entered.
This feature needs to be enabled by your service provider.
5-10
-
- Quick Links:
- Controls and Indicators
Hide quick links:
Advertisement
Table of Contents
