Keylock Setup; Keypad Lock Notification; Setting Automatic Keylock Delay; Setting Keylock On Startup - Motorola MTM5400 Feature User Manual

Select Security → Change Code.
2
3 Radio prompts for the Old Code. Enter currently used 4-digit security code (default setting is 0000).
If the entered code matches the old code, radio prompts for the new code twice.
4
Result: Your radio displays Code Accepted.
Unlocking Your Radio
PIN Protect

5.6.2 Keylock Setup

The keypad lock feature allows locking the keypad to prevent accidental pressing of keys. The keypad lock/unlock
can be invoked using the menu or using a predefined menu shortcut. The keypad lock/unlock can be invoked using
the menu or using a predefined menu shortcut. By default press MENU, and then * key.
By default, while the keypad lock feature is active, all front and side keys (including the PTT button) are inoperative
except for the ON/OFF key and EMERGENCY buttons.
Locking/Unlocking the Keys/Buttons

5.6.2.1 Keypad Lock Notification

When the keypad is locked, your service provider can configure one of the following instructions:
• None — no notification is displayed.
• Notification Only — Keys Locked is displayed.
• Notification and Instruction — Press Menu * to lock/unlock keypad is displayed.

5.6.2.2 Setting Automatic Keylock Delay

Procedure Steps
1 From the home screen, press MENU key.
Select Security → Keylock Setup → Delay.
2
3 Use up and down NAVIGATION keys to change the minutes and press Done.

5.6.2.3 Setting Keylock on Startup

Procedure Steps
1 From the home screen, press MENU key.
-
5.6.2 Keylock Setup
5-19