Location; Viewing Your Position; Packet Data - Motorola MTM5400 Feature User Manual

Select one of the following:
3
• Trunked Mode — Switches to the mode using infrastructure.
• Direct Mode — Switches to the mode without using infrastructure.
• Repeater Mode — Switches to the Repeater Mode.
• Gateway Mode — Switches to Gateway Mode.
• TXI Mode — Select Activate to stop sending any radio transmission.
If the radio is in TXI Mode, it is not possible to switch from Direct Mode to Trunked Mode or
Repeater Mode, or Gateway Mode.
Networks
Entering TMO / DMO Mode

5.14 Location

See the GPS Location Service for more information.
GPS Location Service

5.14.1 Viewing Your Position

1 From the home screen, press MENU key.
Select More . . . → Location → Position.
2
3 Scroll to view the results about the last time your location was calculated.
To refresh your position:

5.15 Packet Data

The Packet Data (PD) Service allows you to transfer data in a TETRA system using the Internet Protocol (IP).
-
• enter Position — the radio refreshes its position automatically
• press Refresh
5.14 Location
5-47