Setting Scan Lists; Editing Scan Lists - Motorola MTM5400 Feature User Manual

Select More . . . → Group Setup → Scan → Active List.
2
If Scanning is Off is displayed, go to More . . . → Group Setup → Scan → Scanning → On to
enable scanning.
3 Select View and highlight the required talkgroup.
4 Press MENU.
5 Select one of the following:
• Delete — Erases this group from the active scan list.
• Priority and select new priority to Low, Medium or High.

5.8.1.3 Setting Scan Lists

When and where to use: If you want to set up any scan list.
Procedure Steps
1 From the home screen, press MENU key.
Select More . . . → Group Setup → Scan → Scan Lists.
2
3 Highlight required scan list and press MENU to see additional settings:
• Rename — Enter new name for that scan list.
• Capacity — Displays the number of assigned and unassigned talkgroups for the scan list.
• Clear — Deletes all the talkgroup assigned to that scan list.
• Add Group — Adds a talkgroup to the scan list. Select one talkgroup from your talkgroup folders and
assign appropriate priority.
• Edit — Changes the priority of the required talkgroup or deletes it.

5.8.1.4 Editing Scan Lists

Procedure Steps
1 From the home screen, press MENU → More . . . → Group Setup → Scan → Scan Lists
2 Highlight a required scan list name.
-
5.8.1.3 Setting Scan Lists
5-37