Using Timed Talkgroup Change; Activating Talkgroup Scanning - Motorola MTM5400 Feature User Manual

Feature User Guide
• Select Optns → TG by Folder. Select a folder and then a talkgroup name.
• Press ROTARY KNOB and rotate it until the required talkgroup name is displayed. Press Select to confirm.
If the ROTARY KNOB mode is set to Scroll, then you do not need to press it to enter scrolling
mode.
Your radio can have an access up to three levels of the folder structure.

2.12 Using Timed Talkgroup Change

This feature allows you to switch between the original and the predefined talkgroup (TMO or DMO) for a predefined
time by using a One-Touch button. After the timer expires, your radio returns to the previously attached talkgroup.
Prerequisites: Timed Talkgroup Change is assigned to One-Touch button.
Procedure Steps
1 Press button.
2 Your radio switches the talkgroup for a predefined amount of time.
3 When the group call ends, your radio switches to the original talkgroup after the predefined time.

2.13 Activating Talkgroup Scanning

When and where to use: If you want to monitor any TMO Group Call in the defined talkgroup list.
Procedure Steps
1 From the home screen, press MENU key.
2 Select More . . . → Group Setup → Scan → Scanning.
2-12
To start a group call press PTT.
Your service provider can assign a function to the second press of the One-Touch button to:
• Return to original talkgroup
• Restart the predefined time
• No action
-