Manual Installation Using The Add Printer Wizard (Windows 8/8.1/Server 2012/Server 2012 R2); For Network Connection (Lpr/Port 9100/Smb) - Konica Minolta bizhub Pro 951 Additional Information

5.2

Manual Installation Using the Add Printer Wizard (Windows 8/8.1/Server 2012/Server 2012 R2)

5.2 Manual Installation Using the Add Printer Wizard (Windows
8/8.1/Server 2012/Server 2012 R2)
This chapter describes the procedure for installing the Windows printer driver using the standard Windows
8/8.1/Server 2012/Server 2012 R2 Add Printer function, without using the installer. For details about how to
manually install on an OS other than Windows 8/8.1/Server 2012/Server 2012 R2 or how to use the installer,
refer to [User's Guide - Printer].
5.2.1

For Network Connection (LPR/Port 9100/SMB)

You can install the printer driver either by searching for the printer on the network, or by creating a new printer
port.
Settings of this machine
To use Port 9100, LPR, or SMB printing, you must configure the network settings for the machine in advance.
Items to be configured
IP Address
RAW port number
LPD Setting
SMB Setting
d
Reference
You can check the network settings such as the IP address of this machine by pressing [Administrator Set-
ting] - [Network Setting] - [Controller NIC Setting] on the Utility Menu Screen.
The Utility Menu Screen is displayed by pressing Utility/Counter on the control panel.
To use SMB printing in the IPv6 environment, [Direct Hosting Setting] should be enabled.
Designate the file for the printer driver provided in "EN (en)" folder of each printer driver contained in the Driver
CD-ROM.
Installing the printer driver by searching for the printer using the Add Printer
Wizard
0
Installing the driver requires the administrator privilege.
0
Since the printer is searched for during the installation, be sure to connect this machine to the network
before turning it on.
1
Insert the Driver CD-ROM into the CD-ROM drive.
2
Right-click the Start window, and then click [Devices and Printers] under [All Applications] - [Control
Panel] - [Hardware and Sound].
In Windows 8.1/Server 2012 R2, right-click the Start button [
ware and Sound] - [Devices and Printers].
bizhub PRESS 1250/1250P/1052, bizhub PRO 951
Description
In [TCP/IP Settings], specify the IP address.
To use Port 9100 printing:
In [TCP/IP Setting], enable the RAW port number (default value: [9100]).
To use LPR printing:
Set [LPD Setting] to [Enable] on the last page of [Detail Setting].
To use SMB printing:
In [SMB Setting] - [Print Settings], specify NetBIOS Name, Print Service
Name, and Workgroup.
], and then click [Control Panel] - [Hard-
5
5-3