Redialing - Muratec MFX-1820 Quick Start Manual

Redialing

Manual redial
The destinations for the last 10 fax transmissions and phone calls are stored in the machine's memory.
1
Switch to fax mode.
2
Load your document.
3
Press the upper cursor key (Redial).
4
Select the destination using the cursor keys and press [Enter].
5
Press <Start>.
Auto redial
If the destination is engaged and a fax cannot be transmitted, the machine will redial up to two more times at
an interval of 3 minutes.
NOTE
• The number is not automatically redialed in the manual transmission.
• The message "Redial" appears on the LCD when the machine is waiting to Auto Redial.
• The auto redial frequency and interval can be set from 0 to 10 times, from 3 to 5 minutes respectively.
• To cancel the auto redial, press <Job Confirm./Fax Cancel> to delete the reserved command.
• For more details about settings, refer to the User's Guide on the included driver CD.
62