Preparation After Storage - Arctic Cat Prowler Service Manual

Preparation After
Storage
Taking the vehicle out of storage and correctly prepar-
ing it will assure many miles and hours of trouble-free
riding. Arctic Cat recommends the following proce-
dure to prepare the vehicle.
1. Clean the vehicle thoroughly.
2. Clean the engine. Remove the cloth from the
exhaust system.
3. Check all control wires and cables for signs of
wear or fraying. Replace if necessary.
4. Change the engine/transmission oil and filter.
5. Check the coolant level and add properly mixed
coolant as necessary.
Back
1-6
Back to TOC
6. Charge the battery; then install. Connect the bat-
tery cables.
! CAUTION
The ignition switch must be in the OFF position prior
to installing the battery or damage may occur to the
ignition system.
! CAUTION
Connect the positive battery cable first; then the
negative.
7. Check the entire brake systems (fluid level, pads,
etc.), all controls, headlights, taillight, brakelight,
and headlight aim; adjust or replace as necessary.
8. Tighten all nuts, bolts, cap screws, and screws
making sure all calibrated nuts, cap screws, and
bolts are tightened to specifications.
9. Check tire pressure. Inflate to recommended pres-
sure as necessary.
10. Make sure the steering moves freely and does not
bind.
11. Check the spark plug. Clean or replace as neces-
sary.
Back to Section TOC