Using Do Not Disturb - Cisco 7961G Phone Manual

If you want to...
Set up or cancel call
forwarding remotely, or for a
non-primary line
Tips
• Enter the call forward target number exactly as you would dial it from your phone. For example,
enter an access code or the area code, if necessary.
• You can forward your calls to a traditional analog phone or to another IP phone, although your
system administrator might restrict the call forwarding feature to numbers within your company.
• Call forwarding is phone line specific. If a call reaches you on a line where call forwarding is not
enabled, the call will ring as usual.
• Your system administrator can enable a call forward override feature that allows the person
receiving your forwarded calls to reach you. With override enabled, a call placed from the target
phone to your phone is not forwarded, but rings through.
• Your system administrator can change call forwarding conditions for your phone lines.

Using Do Not Disturb

You can use the Do Not Disturb (DND) feature to block incoming calls from ringing your phone. Your
system administrator enables DND for your phone.
When DND and Call Forward All are both enabled on your phone, calls are forwarded and the caller
does not hear a busy tone.
Your intercom lines still ring when DND is active.
If you want to...
Turn on DND
26
Then...
1. Log in to your User Options web pages. (See
User Options Web Pages, page
2. Access your call forwarding settings (See
Settings on the Web, page
When call forwarding is enabled for any line other than the
Note
primary line, your phone does not provide you with any
confirmation that calls are being forwarded. Instead, you must
confirm your settings in the User Options web pages.
Then...
Press DND or
Do Not Disturb
"Do Not Disturb" displays on the phone, the DND
and the ring tone is turned off.
Accessing Your
56.)
Controlling Line
62.)
.
lights,
OL-12459-01