Connecting Audio Equipment - Sony PMW-RX50 Operating Instructions Manual

To start recording using a trigger signal from an
external device
When recording HD SDI signal input, setting
[SDI Rec Control] (page 51) to [On] in the
[VIDEO SET] menu enables the recorder to start
recording when a REC trigger signal is received
from the device connected to the SDI IN
connector.
Notes
• Support for Level A for 3G SDI signals is planned for
future updates.
• No operation occurs if the connected external device
does not support the REC trigger signal function.
66

Connecting Audio Equipment

Connecting Audio
Equipment
You can input audio signals on channels separate
from the video signal by using the AUDIO IN 1/
2 connectors on the audio input box. Audio input
levels can be adjusted using the audio input level
knobs on the audio input box.
AUDIO IN 1/2 connectors (XLR type, 3-
pin)
Input audio signals from an audio mixer, or other
audio equipment.